PERFORMANCE WITHOUT REPLACEMENT
When the roof has another decade in it, don't replace it. Coat it.
Restore waterproofing, improve reflectivity, and extend the service life of a sound commercial roof at a fraction of the cost of replacement.
TRUSTED BY
Extend the Roof You Have Before You Replace It
A reroof is not always the answer. For many commercial roofs, a properly applied coating restores waterproofing, reflects heat, and adds years of service life — at a fraction of the replacement cost. The key is honesty about which roofs are good candidates and which are not, and that honesty is exactly what most owners struggle to get.
AVID Roofing & Waterproofing applies silicone and acrylic coating systems with the discipline the work demands. Coating is unforgiving of shortcuts — surface preparation is everything — and our crews treat the preparation as seriously as the application. We will also tell you plainly when a roof is too far gone to coat, because a coating over a failing roof buys an expensive delay.
The energy dimension is often underappreciated. A reflective coating dramatically lowers rooftop temperatures, reducing the cooling load on the building beneath it. In the North Texas climate, that translates into measurable utility savings across a long cooling season — a benefit that accrues every month the coating is in service.
Our Coating Process.
The process begins with assessment and preparation, not the coating itself. We scan the roof for wear and damage, test adhesion to confirm the surface will hold the system, and clean thoroughly — pressure-washing larger roofs to remove built-up dirt, algae, and grime that would otherwise compromise the bond.
We then reinforce seams and joints, patch any damaged areas with roof tape, and confirm that the surface is immaculate and completely dry before applying the membrane coating. Only then do we apply the silicone or acrylic system that delivers the moisture and heat resistance the roof needs.
We also confirm that the roof is dry before we coat it. Sealing moisture under a coating traps it, and trapped moisture destroys both the coating and the roof beneath it. Our preparation includes verifying that the substrate is sound and dry, so the system performs rather than failing prematurely.
What You Get and the Risk You Avoid
You get a restored, waterproof roof surface that reflects sunlight and heat — reducing cooling loads and keeping the building cooler through North Texas summers — and a meaningful increase in service life, without the cost and disruption of a full tear-off.
The risk we help you avoid runs both ways: replacing a roof that only needed coating and coating a roof that genuinely needed replacing. Our assessment is built to tell you which situation you are actually in.
You also get an honest verdict on candidacy, which is rarer than it should be. A contractor paid to coat will coat anything; we will tell you when a roof is too far gone, because a coating over a failing roof is an expensive way to postpone the replacement you already need. That honesty is the most valuable thing we bring to the assessment.
Logistics and Continuity.
Coating is typically less disruptive than replacement. Most coating projects can be completed in a day; larger, multi-building scopes may take several days. We work efficiently and schedule around your operations, so the process does not interrupt your tenants or your business.
The same firm that assesses, prepares, and coats the roof stands behind the result — continuity that protects the quality of a system where preparation determines everything.
Most coating projects can be completed in a day; larger, multi-building scopes take several days, and the work is typically far less disruptive than a tear-off. We schedule around your operations so the process does not interrupt your tenants or your business, and the same firm that assesses, prepares, and coats the roof stands behind the result.
Roof Coating
Frequently Asked Questions:
A commercial roof coating system is a liquid-applied membrane sprayed or rolled onto an existing roof surface. It seals small cracks and gaps, restores waterproofing, and typically reflects UV and solar heat. The two main types are silicone and acrylic. Silicone offers superior durability and moisture resistance—it can handle water pooling without degrading. Acrylic is more cost-effective and reflective, making it a good choice for energy savings. Both systems harden into a seamless layer across the entire roof rather than individual pieces like traditional membranes. Coatings extend a roof's service life by years if applied to a sound substrate; the key is surface prep—dirt, debris, or rust under the coating will cause failure. That's why AVID treats prep as seriously as application.
Coating is the right choice when the roof's structure is sound, but the membrane is aging or has minor leaks. If it's mid-life with a few isolated wet spots or you want to extend service life while cutting energy costs, coating buys years at a fraction of the replacement price. Replacement makes sense when the membrane is deteriorating across the surface, leaks are widespread, the underlying structure is compromised, or the roof is already near the end of its life. Coating a failing roof is an expensive delay—it might buy you two or three years, but you're still replacing eventually, so you've just pushed the cost forward and added another layer to tear off. AVID won't recommend a coating if the roof isn't a candidate because that's the wrong answer financially and operationally. The inspection is how you find out which one your building actually needs.
A properly applied coating system typically extends roof life by 10 to 15 years. Some silicone coating systems carry 10-year manufacturer warranties. The coating also restores solar reflectivity — which reduces cooling load and thermal stress on the membrane in Texas heat — slowing future
degradation.
Coating costs a fraction of replacement—typically 20–30% of what a full reroof would run. That's the whole point: if your roof is a candidate for coating, it's the cheaper way to buy years of additional service life without the complexity and downtime of a full replacement. But price alone isn't the answer; a cheap coating on a failing roof is just wasted money. That's why the inspection matters—AVID needs to tell you whether coating makes sense before you're comparing numbers.
TPO, PVC, EPDM, modified bitumen, built-up roofing (BUR), metal panels, and spray polyurethane foam (SPF) systems can all receive coating restoration — with the correct coating type matched to each substrate. A silicone coating applied to a modified bitumen roof requires different surface prep
and chemistry than the same coating applied to metal. Substrate-to-coating compatibility is non-negotiable.
Permit requirements vary by municipality across DFW — some require permits for coating applications over a certain scope; others do not. Manufacturer warranty on a coating system requires certified installation. AVID holds coating installer certifications that activate manufacturer warranties on completed systems, which is the difference between a warranty and a promise.